Okay, I will spare the details of the six week change of the blower motor. If you need yucks, let me know and I can send them to you direct. Anyway, I had to disconnect the heater tubes to get the blower motor out. I bled the system and don't think I saw any bubbles when I was done. I let the system purge for about 5 minutes - is this long enough?? Followed Bentley instructions. My blasted oil light also came on, oil level okay, but is that just due to the poor guy literally sitting for almost 3 months? I intend to change the oil ( from 10w - 30 to 20W - 50 ) and filter (Mann) before any more driving. Any other thoughts? Thanks Mike ( if there is a way to do repairs the hard way, I will find it - or invent it!!) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.