Date:         Sat, 15 Apr 2000 10:52:33 -0700
Reply-To:     Davidson <wdavidson@THEGRID.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Davidson <wdavidson@THEGRID.NET>
Subject:      Re: Custom Cat Heaters
Comments: To: Malcolm Stebbins <Malcolm.Stebbins@MSVU.CA>
Content-Type: text/plain; charset="iso-8859-1"

Malcom,
This was actually mentioned a little over a year ago my John (or Jon?) I
believe.

I think this would be problematic since there are electrical as well as
propane hook ups that would be a problem for opening and closing the door..
even if there is enough room in there (these heaters are 6 inches deep I
believe). Also, I don't think you would find many people willing to cut the
exhaust hole in their door.

Personally, I really prefer a removable strategy as I don't always camp in
the cold.... and a strategy that doesn't require permanent alterations to
the van, if possible.

Just my 2 cents...
Bill
-----Original Message-----
From: Malcolm Stebbins <Malcolm.Stebbins@MSVU.CA>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Saturday, April 15, 2000 10:34 AM
Subject: Re: Custom Cat Heaters


>OK I'll jump in here with an idea that might work.  Since you're starting
from
>scratch, how about recessing the cat heater in the sliding door and vent it
>out the door.  One might have have to have a easily detachable propane hose
>but that would get the heater out of the way completely!!!!   Malcolm
>