Date:         Sun, 16 Apr 2000 17:09:52 EDT
Reply-To:     ThingGuy@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve Lashley <ThingGuy@AOL.COM>
Subject:      Carver P4 (was Custom Cat Heaters)
Comments: To: mike_l_f@hotmail.com
Content-Type: text/plain; charset="ISO-8859-1"

In a message dated 4/16/00 12:31:31 PM, mike_l_f@HOTMAIL.COM writes:

<< I've been thinking quite a bit about the idea of a heater for the van. My
desirable criteria are -

        Minimum 5-6000 btu
        Connect to built-in propane and power
        Vented
        Quiet operation
        Relatively inexpensive >>

Mike,
Sounds like you described the Carver P4!
I think by the time you're finished with this custom installation it will 
cost you more in time and materials than a Carver P4.  The Carver comes 
complete with the installation kit.  All you need to install it in a Westy is 
some 1/4" copper gas line and maybe a T fitting.  Everything else in included 
with the installation kit.

I have a few Carver units in stock, but I won't likely be ordering more until 
late summer.

<A HREF="http://eurocampers.com/Carver.html">Carver P4 Heater for RV's, 
Campers, Vans and Bo…</A>
http://EuroCampers.com/Carver.html

Pmail for listmember pricing.

Steve Lashley
'66 Westy
'74 Campmobile
'93 EV MV
<A HREF="http://eurocampers.com/">http://EuroCampers.com</A>
314-614-0750
Importing German Side Tents, Carver Propane Heaters and other Accessories for 
Bus, Vanagon and EuroVan