A few months back I purchased an 81 Vanagon, and to my horror after purchase, the watertank was missing. I have since found a water tank, put it in the car, and found the wiring that goes to the sensors under the small seat to the left of the stove/fridge. My question is how to the small guage wiwe=ries attach to the sensors top to bottom? Also, there is a heavy gauge green wire and black wire taped off there as well. I also need to know how the wiring goes from the fauset to the pump/tank? All of this is disconnected, and the Bentley does not offer much help. The wire is dangling under the faucet with a connector on the end. There are two wires that come off the pump that are cut off. I am clueless without a good schematic or detailed instructions. Could someone reference their vehicle and reply??? Adam Puzerewski |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.