A couple of weeks ago someone posted about a problem with the plastic breaking on their distributor and exposing the wires from their hall sender. I would like to add one more hint about sealing the wires, use a low temp hot melt glue gun. My wife just bought one and the thing is great, it gets hot enough to melt the glue but the glue will not melt styrofoam board, so the temp shouldn't bother wires or the electronics inside the distributor, feel free to correct me if I am wrong. It still gets too hot for you to touch the end, you WILL get a nasty burn but this might be something to keep in mind for all future projects. John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.