Date:         Tue, 25 Apr 2000 19:40:47 -0500
Reply-To:     John Rodgers <inua@HIWAAY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@HIWAAY.NET>
Subject:      Re: Fresh rebuild. now what?
Comments: To: Ibuyvws@AOL.COM
Content-Type: text/plain; charset=us-ascii

When my 2.1L was rebuilt, it was run for two hours on straight 30wt oil. Then the
oil was changed and a new filter installed. Drove it for 500 miles at 55mph or
under. I made a point to make most of that mileage on a good round trip drive on
the highway so I could maintain pretty much a constant engine speed and load. At
the 500 mark  I changed the oil to a detergent type oil - Texaco Havoline  and
put on another filter. Changed it all again at 1500 miles and now I am running on
a regular change schedule of 2500 miles. Worked really good for me. No oil
consumption and good compression.

John Rodgers
88 GL Driver

Paul Bucco wrote:

> Hi List,
>                I have a fresh 2.1  rebuild and have put about 30
> problem-free(knock on wood) miles on it.  I read on Bob Donalds' Boston
> Engine site that i should keep the speed below 55mph for the first 1000
> miles, and  to change the oil at least twice during this period.  I have been
> keeping my eyes on the coolant temp.  What else should i be looking at or
> listening to?
>
> Thanks in advance,
>                 Paul  Bucco        ibuyvws@aol.com
> 87  wolfsburg edition vanagon
> 65 21 window deluxe bus
> 71 squareback automatic