Date:         Tue, 25 Apr 2000 17:11:24 +0100
Reply-To:     Peter Cassidy <pcassidy@APPLE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Peter Cassidy <pcassidy@APPLE.COM>
Subject:      Re: Gene Berg Short shift/extension kit
Comments: To: BRENT CHRISTENSEN <bchristensen@INFOGENESIS.COM>
Content-Type: text/plain; charset="US-ASCII"

>I'm assuming that these Gene Berg kits don't work for Syncros...  ?
>
>Brent Christensen

Can't say for sure, but I don't see why not. All they are is a 1" plate
which is bolted to the floor. A collar is then fitted to the gearshift
stick and the stick is re-bolted to the floor on top of the 1" plate.
If the shifter is the same in a syncro as a 2WD it should be OK.

Pete C

--
Peter Cassidy,                   pcassidy@apple.com
Sr. Test Dev. Engineer             +353-21-284316
WW Operations
Apple, Cork, Ireland.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.