Tobin asks, "How the heck do I pull the connecting wires out of the block the relay plugs in to without destroying the wires and/or the plug receptacle?" I'm not sure. The female lug snaps into the plastic releay holder and the tab must be released somehow. I'll let others comment on that. BUT if that does not work there is always the option of snipping the wire you plan to replace about an inch or so from the relay holder, and neatly soldering a new wire to the inch piece. Use heat shrink tuming for a neat job. Of course, the relay block has tbe removed to do this. --Nate |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.