I took off the window crank, popped the clips at the top front of the door panel, reached behind and screwed the interior receptor shell on without rotating the speaker assembly. Tim Hannink
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Garrett Adams Sent: Tuesday, May 02, 2000 13:56 To: vanagon@GERRY.VANAGON.COM Subject: Remounting door speakers
I'll be remounting my stock door speaker shells soon. (Using the recently discussed Blaupunkt 3.5" speakers mounted inside). It looks like the two speaker wires need to be hooked up prior to screwing the exterior faceplate into the interior receptor shell. Since it takes a number of turns to cinch up the unit wouldn't that put too many excess twist turns into the speaker wires which would also be revolving? My plan is to manually counter turn the wire leads prior to attachment and hope that will sufficiently cancel out all or most of the final mounting rotation turns. Am I worrying too much? We anal retentive types just never seem to know. :-) Garrett Adams 83.5 Adventurewagen GL Stockton, California |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.