At 22:19 5/3/2000, KENWILFY@AOL.COM wrote: >I figured, problem solved. Then I went to put the 1.9l throttle body on the >air box. It is smaller in diameter and won't fit! So now I guess I am going >to use the the 2.1l throttle body. You should be able to mount the 1.9 AFM on the 2.1 air box using an adapter plate. I kinda think the 2.1 AFM has different values than the 1.9, not sure. > I don't see any way to use the double >throttle position switches from the old throttle body (no way to mount them), >but I bet you could wire in the later model switch (one switch does both >positions on the newer ones) into the system with no problem. I am also Just plug it into either of the existing plugs if they fit, otherwise make up a connection. The existing plugs are wired in parallel. david
David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.