Date:         Thu, 4 May 2000 22:05:07 -0400
Reply-To:     David Beierl <dbeierl@IBM.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@IBM.NET>
Subject:      Re: belt problem
Comments: To: Ibuyvws@AOL.COM
In-Reply-To:  <e0.3f1b18a.26435e85@aol.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 19:15 5/4/2000, Paul Bucco wrote:
>I have had no problems
>other then needing to tighten up the 3 belts at times.

If there's any rust where the belt bears on the pulleys, it will eat the
belt in short order.  I used up a belt figuring this out.  Of course it's a
PITA to sand it off, but so is it a PITA to put on new belts every two weeks...

david
David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.