My right front windshield wiper does not appear to be not loose but it rests just below the window line and then hits the rubber grommet between window and front part of the cab when operating. I have a 90 Wesfalia. I checked my Bentley's but thought I could move the arm up a little bit just by just loosening the external screw rather than go through the glove compartment. But that did not work and now that screw does not move at all. Do I just go through the glove compartment and is that how I align the wiper arm above the window? I am--obviously-- pretty new at tinkering with my van. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.