Date:         Tue, 9 May 2000 07:49:53 -0700
Reply-To:     "Michael A. Radtke" <m.radtke@ELM.AZ05.BULL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Michael A. Radtke" <m.radtke@ELM.AZ05.BULL.COM>
Subject:      Re: Door Handle
Comments: To: Bill Johnson <bjohns@DTX.NET>

Bill,

I replaced my door handle a year or so ago, but I have forgotten the exact
procedure to swap the lock cylinders.  However, it should be pretty obvious
once you know that you know that you need the key that matches the lock
cylinder that's in the handle at the moment.  In other words, the lock pins
keep the cylinder captive until the proper key causes them all to line up.

If you don't have the key, you may want to have a locksmith change out the
cylinder or ask your local burglar to pick the lock for you.

Mike

'84 GL   Phoenix AZ

----------
From:   Bill Johnson[SMTP:bjohns@DTX.NET]
Reply To:       Bill Johnson
Sent:   Tuesday, May 09, 2000 12:14 AM
To:     vanagon@GERRY.VANAGON.COM
Subject:        Door Handle

I received my sliding door handle today from Adam Puzerewski.  It was
exactly as described. Thank you, Adam.  Now I need to figure out how to
change the lock cylinder from my old handle to the new handle.  Anyone
have any hints?

Bill