Date:         Thu, 11 May 2000 10:19:40 -0600
Reply-To:     Larry Hamm <ldhamm@XMISSION.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Larry Hamm <ldhamm@XMISSION.COM>
Subject:      Re: Outer CV Joint
Comments: To: David <david@RENAISSANCE-DESIGN.COM>
Content-Type: text/plain; charset=us-ascii

David wrote:

> On my 82 Vanagon the outer CVs are bad.  I already have the joints, otherwise I would just replace the entire axle.  The question is do I have to take off the hub nub and remove the axel w/spile from the hub like in a front wheel drive VW or can I simply unbolt the axel and change the CVs and bolt it back in??

David,
Don't bother with the hub nut, just unbolt the axle from the stub and the trans, replace the CV, and bolt back in.
Larry

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.