Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2000, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 11 May 2000 22:25:04 -0700
Reply-To:     David Raistrick <keen@LENTI.TYPE2.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Raistrick <keen@LENTI.TYPE2.COM>
Subject:      [VB] GL4 vs GL5 from pennzoil's site (fwd)
Comments: cc: Shawn Wright <swright@MAIL.SLS.BC.CA>
Content-Type: TEXT/PLAIN; charset=US-ASCII

I'm passing these on to Shawn, and the rest who havent found out about this the hard way.

-- David Raistrick '66 SO-44 Westy keen@type2.com in Guyton Ga

---------- Forwarded message ---------- Date: Fri, 31 Mar 2000 14:30:13 -0600 (CST) From: Stephen White <spw@users.anet-stl.com> To: Splitty list <vintagebus@type2.com>, Missouri Micros <missouri_micros@egroups.com> Subject: [VB] GL4 vs GL5 from pennzoil's site

another tidbit from that site...

2. What happens if API GL-5 gear oil is used in an API GL-4 gear oil application?

API GL-4 and API GL-5 products typically use the same extreme pressure (EP) additive system, with the API GL-5 having about twice the concentration of a API GL-4. In service, these additives become active under extreme load and temperature when the protective oil film can be squeezed away. EP additives work by forming wear-resistant compounds with the metal of the gear tooth surface. As the gears mesh, these compounds shield the gear teeth from direct metal-to-metal contact that would cause wear and damage to the gears. If too little of the active additive is present, proper protection would be compromised. Too much of this additive could cause excessive chemical corrosion of the gear surface. If an API GL-5 gear oil is used in a application where API GL-4 gear oil is called for, chemical corrosion of "yellow metal" components may occur, such as bronze synchronizers, brass bushings, etc. This may lead to shifting difficulties or shortened equipment life.

take care,

Steve

p.s. info from http://www.pennzoil.com/carcare/faq/default.htm#4

*************************************************************************** 61 micro, 67 bus hulk, 71 bus daily driver, 75 yamaha XS650, 80 vanagon parts bus, 82 westy , 87 scirocco 16v, 93 corrado, random VW parts spanning 4 decades, enough computer parts to build 5 pc's and a laptop, opportunivore, air breather, i brake for squirrels, music lover. always remember: The truth will come to you as a hawk swooping down to eat bubblegum wrapper. Pineapple upside down cake is the answer. ***************************************************************************

------------------------------------------------------------------------- For help leaving the list, send a HELP message to VINTAGEBUS-REQUEST@TYPE2.COM -------------------------------------------------------------------------


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.