Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2000, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 11 May 2000 22:45:01 -0700
Reply-To:     David Marshall <vanagon@VOLKSWAGEN.ORG>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Marshall <vanagon@VOLKSWAGEN.ORG>
Subject:      What is the simplest way to get 12V in a 24V VW electrical system?
Content-Type: text/plain; charset="us-ascii"

First off I appologise for a very minimal Vanagon content, but it does relate to a VW and it is part of my collection which includes two Vanagons...

As many of you may already know I am the proud owner of a 1980 Volkswagen Iltis. For those who don't know, it is a military "jeep" that Volkswagen produced for the German Army from 1978 thru 1981 and was later produced in Canada from 1984 to 1985. Seeing how it is a military vehicle the electrical system is 24V DC as opposed to the 12V DC we are used to with our Vanagons. I want to be able to connect a CB / HF Transcever, VHF Transcever as well as a CD-Player in the dash. All of the radios that I have are 12V and will more than likely not appreciate the additional voltage.

Some people suggested to me to take 12V off of one of the two 12V batteries. It has also been pointed out to me that this with setup cause uneven charging of the batteries and will constantly kill one battery.

One item that was suggested to me was a 24V to 12V voltage regulator that can be bought at some truck stores for about $150.

This is what I was thinking... it seems too simple so there must be a problem with it.

Take two 12V lights and wire them in series (12+12=24). Use these at daytime running lights or something simular. Attach a 12V device in parallel to one of the lights as the difference across one of the lights would be 12V. I guess the flaw in my logic might be that if they were two IDENTICAL 12V lights then they would take 12V each... if one light, or one light and the 12V accessory attached to it take more current than the other, the voltage will be different... am I right or am I wrong?

Thanks!

-- David Marshall - Volkswagen Enthusiast - Quesnel, BC, Canada -- -- 78 VW Rabbit, 80 VW Iltis, 80 VW Caddy, 84 VW Westfalia -- -- 85 VW Cabriolet, 87 Audi 5000 Quattro, 88 VW Syncro Double Cab -- -- David's Volkswagen Home Page http://www.volkswagen.org -- -- Fast Forward Autobahn Sport Tuning http://www.fastforward.ca -- -- david@volkswagen.org (pmail) or vanagon@volkswagen.org (list) --


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.