Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (May 2000, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 19 May 2000 13:33:56 -0400
Reply-To:     Dominique Cormann <ml@KOZMIK.GUELPH.ON.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dominique Cormann <ml@KOZMIK.GUELPH.ON.CA>
Subject:      Re: VW ETKA cd
Comments: To: h2oboxer <h2oboxer@OPTONLINE.NET>
In-Reply-To:  <39249906.8D4ED1AB@optonline.net>
Content-Type: text/plain; charset="US-ASCII"

Thank you for posting the link. I have the link to winimage on my page as well.

People who are running NT, ( h2oboxer is running nt ), really need to reread my page again. I posted what you needed to do when I made the page.

I'll quote my page:

> On NT machines, you must install it, then go to the cd and into the > 'EPC_PROG.W95' directory, and copy > > LEXHDL5.DLL > > LEXHDLL5.DLL > > to your ' epc_prog' directory that is installed on your computer.

That is why you are getting the hardlock missing error.

On Thu, 18 May 2000 21:29:42 -0400 h2oboxer <h2oboxer@OPTONLINE.NET> wrote:

> Marc, > > I have been able to successfully extract all the files and install the app onto my > machine. You need to get Winimage. > > http://ourworld.compuserve.com/homepages/gvollant/winimage.htm > > After you install winimage you need to extract ALL the file from the .iso file. > into a temporary directory. > > 1. Start Winimage and open the .iso file. > 2. Select *.* > 3. Click extract (specify the directory to extract to) > 4. Use Extract with path name and click OK. > 5. Wait. > 6. Wait some more (there are a lot of files) > 7. After it is done exit winimage and go to the directory that you extracted the > files to. > 8. You can install the app right from here if you want by running ecmsetup. > 9. It takes about 20 min to install. > 10. Once the install is done , run the app. > 11. I am getting a message about Hardlock missing(I'm not sure what to do next) > > Any help would be appreciated. > > Hope this helps you. > > >

-- ============================================================--------- Dominique Cormann Email: dcormann@kozmik.guelph.on.ca Homepage: http://kozmik.guelph.on.ca Diesel page: http://kozmik.guelph.on.ca/gtdproject


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.