What kind of response is this, David? I'm not mixing freon and power steering fluids. The switch on the P/S senses a load and sends a signal to a valve which opens and bleds in more air to the FI system. The AC compressor could use the same valve. It would send a 12V current to the same valve when the compressor kicks in and do the same thing. I don't know off hand if both switches were wired the same 12V, open or closed to ground... You would have to look in the Bentley. My A/C is not working right now so I don't know if this is a problem for my van. Jay |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.