I was told to just push in the pins. This worked just fine for many miles. Karl Wolz ----- Original Message ----- From: "Todd Last" <Rubatoguy@MINDSPRING.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, June 07, 2000 10:50 AM Subject: Re: Attaching lower grille
> If you get the clips from VW, they will have a plastic rod/pin in the center of > the clip. > You have to remove this small rod so that you have a hole that the screw will go > into. > > This is one that baffled the VW parts guy when I ordered some of these. It seems > that the > clip is used for multiple cars - so it is not readily apparent how the screw is > used. > > Todd > > Brian Doss wrote: > > > The stock clips work in conjunction with screws. The screws expand the barbs > > on the plastic clips. If yours are "far too big" maybe you have the wrong > > clips? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.