Date: Sat, 3 Jun 2000 14:46:46 -0700
Reply-To: vince_pappalardo@HP.COM
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "Vince P." <vince_pappalardo@HP.COM>
Subject: MORE new parts for sale
Content-Type: text/plain; charset="iso-8859-1"
Well, I open the last of the boxes I was cleaning out of the garage and found a
few more Vanagon parts. I believe this is the last of the parts.
Fuel Filler Grommet, 50MM Tank, PN 251 201 139A, $5
Fuel Tank Grommet (requires 2), PN N 901 004 01, $2ea (I have 3)
--These are the ones that go on the top of the tank
5mm ID High pressure Fuel Injection Hose, OEM VW, Braided outside, 6 ft long, $5
7mm ID High pressure Fuel Injection Hose, OEM VW, Braided outside, 7 ft long, $5
Hose, Water Thermostat, 2.1L Vanagon, PN 025 121 058E, Hose, $3
--This hose is tapered and is 15mm ID (22mm OD) at one end and 11.5mm ID (19mm
OD) at the other end by 69mm long
Cooling System Hose, Vanagon, PN N 901 287 03, $7
--This hose is 24mm ID (31mm OD) x 58mm long
Coolant Reservoir Cap, Vanagon W/Round Reservoir, PN 025 121 321B, $6
Gasket, Exhaust, Muffler to Tailpipe, 72-79 Bus, 80-91 Vanagon, PN 025 251 235,
$3
Elring Engine Gasket Set, Complete, German, 83-91 Vanagon, (MISSING both head
gaskets, one valve cover gasket, & Head Sealant used), has various exhaust,
intake, large and small o-rings, small and large main seals $15
Transmission Bushing, PN 113 141 711 A, 1.9L Vanagon, $3
--This bushing is what the cross over shaft (shaft the throw out bearing
attaches to) rotates in. This bushing is 18mm ID (20mm OD) by 20mm long.
Requires two but I only have one.
Remote starter Relay, Borg Warner, Heavy duty with bracket mount, 63mm x 93mm x
65mm, $20
--I was going to use this to rewire the ignition switch to the starter so it
would not intermittently not start.
As before, shipping is not included but I will only charge what it cost me to
ship them to you. So, send me an email with your address and I will respond
with the shipping charges. The way I have been working it is when I receive
your check, I put the parts in the regular US mail the next day. So, far this
has worked well (I would only do this with List members).
|