Date:         Wed, 7 Jun 2000 16:28:56 -0400
Reply-To:     David Beierl <dbeierl@IBM.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@IBM.NET>
Subject:      Re: wiring for water tank
Comments: To: Puzerewski <Puzerewski@EMAIL.MSN.COM>
In-Reply-To:  <003701bfd0bd$9c863260$579a183f@amy>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 09:13 7/9/99 -0700, you wrote:
>David,
>
>I got the pump working but I do not think i have the sensors hooked up
>right.  If you can tell me the colors of the wires connected to the
>sensors on the side of the tank and if there are any additional
>connections made to the black box in the cabinet, I would appreciate it.
>
>Thanks,
>Pete

Top -- green plus green from harness
2nd -- yellow
3d  -- white
Bottom -- double black from side of harness.

Black wire from black box, no connection.

Lights should be green when almost full, yellow for most of the tank, red
when close to empty and no lights when only a liter or two left.

cheers
david
At 16:18 6/7/2000, Puzerewski wrote:
>Hello,
>     Just installed water tank / cabinet to my 81.  The yellow, white, and
>black wires were not connected anywhere ( These are the ones from the little
>black box attached to the wall of the cabinet).  Can anyoune go out to there
>car (one where all the water level lights work) and tell me from top to
>bottom, which color goes on what tank sensor?
>
>TIA
>
>Adam Puzerewski
>81 westy

David Beierl - Providence, RI
  http://pws.prserv.net/synergy/Vanagon/
'84 Westy "Dutiful Passage"
'85 GL "Poor Relation"