Date:         Fri, 9 Jun 2000 09:23:08 -0700
Reply-To:     "Buettner, Peter" <PGB@DOLBY.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Buettner, Peter" <PGB@DOLBY.COM>
Subject:      Re: Power Window Switch Repairs
Comments: To: Wes Neuenschwander <wesn@ESKIMO.COM>
Content-Type: multipart/alternative;

They are very easy to take out.  You have to remove the frame first.  Pop
out the frame on the top with your hands of a screw driver.  Don't try to
pop the frame out at the bottom or it will break.  The switches are easily
available at the dealer and also relatively inexpensive (for a Vanagon part)
since they are shared with the Jetta/Golf/etc.

Good luck,
Peter

-----Original Message-----
From: Wes Neuenschwander [mailto:wesn@ESKIMO.COM]
Sent: Friday, June 09, 2000 1:19 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Power Window Switch Repairs


The front-most power window switch on the driver's side (the one that
controls the passenger side window) has gotten progressively more
sticky over the last year or so.  It primarily sticks in the window up
position, causing the window motor to make a clicking sound (I'm
assuming it's an overload/overheat relay in the window motor) and
frequently interferes with the operation of the passenger side switch.
The basic problem with the 'sticky' switch seems to be mechanical;
that is, it seems that the rocker mechanism is jamming, perhaps
against the switch cover bezel piece or even within the interior switch
mechanism.

Is there any way of removing and dissassembling this unit?  How
difficult is removal of the switch assembly?

-Wes

Wes Neuenschwander
Seattle, WA
wesn@eskimo.com

[text/html]