Date:         Fri, 9 Jun 2000 21:56:09 -0700
Reply-To:     "Tom L. Neal" <jneal@NETCOM.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Tom L. Neal" <jneal@NETCOM.COM>
Subject:      Re: Power Window Switch Repairs
In-Reply-To:  <20000609214230.27780.qmail@hotmail.com>
Content-Type: TEXT/PLAIN; charset=US-ASCII

Well, Wes, at least your switche sticks in the up position.  Mine liked to
stick in the down position before I finally swapped the front two so the
bad switch was temporarily "covered" by the driver's side switch. All the
switches need to be in or none of the switches work.

I've taken the high use one apart several times, cleaned it, lubed it and
put it back together (that's a real trick...wife holds 2 .010 feeler
guages in the side while I push straight down).  It sounds great, feels
great...and works only sometimes.  Maybe the contact is bent.  But it does
seem getting new ones like Peter suggested, or cheap used ones from the
passenger side of some vehicle and resoldering the wires might make sense.
I even tried putting my spare passenger side one into the driver's
side and there is so much extra wire it didn't want to go back together.

The legs break off, too, so I screwed a little plastic plate on the back
to catch behind the door.

Fun with Vanagons.

Cheers, Tom Neal '87 with a brand new Luk clutch (thanks, BusDepot), and
worn shifting parts...next project.