Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2000, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 12 Jun 2000 14:19:54 -0400
Reply-To:     The Gunnings <ngunn@LANDMARKNET.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         The Gunnings <ngunn@LANDMARKNET.NET>
Subject:      Re: Clutch master cyl replacement procedure?
Comments: To: Tobin Copley <tobin.copley@UBC.CA>

----- Original Message ----- From: Tobin Copley <tobin.copley@UBC.CA> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, June 12, 2000 1:20 PM Subject: Clutch master cyl replacement procedure?

> My clutch master cylinder is leaking fluid from where the push rod > enters the top of the cylinder. Fluid is, of course, soaking the > carpet. I'm going to replace it--the MC, that is, not the carpet. > > Problem: the Bentley manual is of no help re: the procedure for doing > the replacement. All I can find in it regarding the clutch master > cylinder is one page with info limited to one diagram showing the > clutch MC as part of the total clutch hydraulic system. No info > beyond that. Useful! > > So, what's the procedure? Do I have to remove the pedal assembly, or > can the MC be removed with everything else in situ? Any other > materials/tools/etc I need for doing this beyond basic tool set? > Never done this sort of work before, so any tips/warnings/gotchas > welcomed. Need any sort of sealant for where hydraulic lines enter > the MC? How is pushrod freeplay adjusted? Anybody care to hazard a > total time estimate for the job for someone who has done work on > buses before, but never this particular job? Bentley *does* say a > pressure bleeder is needed to bleed the system, and I don't have one > of those. Can I get away without? How much would I expect to pay > for one that would do the job? Recommendations on pressure bleeder > sources, especially from folks in Canada? > > Questions, questions, questions! > > Might as well bleed the brakes while I'm getting covered in brake > fluid anyway... > > Thanks in advance for any and all help! > > T. > (my old old-cooled buses never had leaking clutch cylinders, grumble, > grumble. Although the cables would let go at awkward times...) > ------------------------------------------------------------------------- > Tobin Copley Bowen Island, BC, Canada tobin.copley@ubc.ca > > '82 westy 1.6L NA diesel ("Stinky") > '97 son Russell ============= > '99 daughter Margaret /_| |__| |__|:| clatter > 1995: 'Round US, Mexico, Canada 15,000 mi O|. .| clatter! > 1996: Vancouver to Inuvik, NWT 7,400 km ~-()-==----()-~ > Previous buses: '76 westy deluxe (Daisy), '76 westy standard (Mango) > http://www.sfu.ca/~tcopley/vw/ > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.