Probably the best way to fix this would be to install steel inserts in the bolt holes on the oil pan or do like I did and drill n' tap from M8 to M10. I had this happen on mine and the loose bolts chewed up the alloy threads. I use M10 allen heads. Big and beefy and hold the bracket securely. If your threads are still good I would reassemble with new bolts and locktite blue. Ken Hunter 82 Westy 1.9D 84 Jetta 1.5D 89 Mitsubishi van |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.