Volks, I came across a problem where I would need some helpful hints: Upon start everything is normal, all lights go out. Once the engine revs over 2500rpm the oil light starts blinking and the buzzer sounds. When you shut of the engine and start again the buzzer is quiet again until you accelerate the engine. There is enough oil in the engine. The engine has just been rebuilt completely. The oil pump is okay. There are two new oil sensors in the engine and the wiring connections seem to be fine. I can only think of two suspects: the control chip in the dash or the pressure release valve. Any other ideas or hints on what to test? The Bentley manual has some testing procedures but they are in the end not really conclusive in this case. Thanks for suggestions. Björn
Björn Ratjen Mill Bay, B.C. 1987 Vanagon Syncro est alia (self camperized, TDI wannabe) 1978 VW Bulli (self camperized) 1995 Passat TD Wagon (hers) 1970 VW Beetle (son's) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.