Date:         Wed, 21 Jun 2000 11:05:42 -0700
Reply-To:     Stuart MacMillan <macmillan@home.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <macmillan@home.com>
Subject:      Re: VDO Oil gauge...
Comments: To: Richard Bias <rbias@hotmail.com>
Content-Type: text/plain; charset=us-ascii

It's both, but really electric.  You need a short hose to reach from the
old sender port to the new sender since it is too big to fit directly.
All is available from VDO, and definitely get the dual sender for the
early warning from an attention getting red light. The 1.9 has only one
sender right in the middle of the main bearing oil gallery, the perfect
place to measure pressure.

See http://www.bus-boys.com/bbvdo.htm for a good description of the
products.  Other list vendors sell these too, possibly for less $$$.  I
bought the dash top individual mounting cup (expensive but very nice
looking) and mounted it next to the instrument panel.

I can send pix of the installation on the engine if you want.

Richard Bias wrote:
>
> All,
>   There has been many suggestions on the list lately to install a "VDO Oil
> gauge.  A few questions...  Is it electronic (signal sender)or small hose
> (actual oil carrying tube)?  I have an 85 with one oil sender position, will
> this gauge work for me?  Thanks for the reply and input.
> Rich and Annemarie
> 85 GL "Buba"
> 98 Bug
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

--
Stuart MacMillan

'84 Westy
'65 MGB
'73 MGB GT