Yeah, you remove the two Phillips screws to unmount the mirror. Underneath that mounting shoe is a nut with a spring and ball type assembly. If you tighten the nut, you tighten the spring, which puts pressure/tension on the ball and makes the mirror less likely to be blown in the wind... caution, over tightening can make mirror adjusting too difficult and may crack your mirror. Todd '84 Westy "Titania"
----- Original Message ----- From: "roch roch" <roch333@hotmail.com> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, June 24, 2000 2:17 PM Subject: westy mirror tightening
> The passenger side mirror on 84 westy moves with any wind or truck passing > me by. Is there a way to tighten mirror? I see 2 phillip screws but they > look like they just mount mirror to door. Do I remove those 2 screws and > then there is something inside to tighten? > > ________________________________________________________________________ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.