Date:         Mon, 26 Jun 2000 10:30:39 -0700
Reply-To:     Stuart MacMillan <macmillan@home.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <macmillan@home.com>
Subject:      Re: Hot Footwell Kit and Luggage Rack Screaming
Comments: To: Jeanne Maly <traveller57@cableone.net>
Content-Type: text/plain; charset=us-ascii

Jeanne,

The seal must indeed be tight against the top, but there is no way to
"adjust" this, the position of the brackets and bolt holes is fixed.
Water drains out the back corners at the bottom edge of the rack.  If
you look closely, you will see the gaps on both sides under the pop top
front edge and just behind the end of the rack seal.  If the seal is not
tight across the front, wind noise will be horrendous.  That is why the
seal is there in the first place.

I used the bulb type seal from Rocky Mtn. Motorworks, if the one you got
won't seal, just buy the rack seal from RMM, it's cheap.

Regarding the hot footwell, I don't know about a  kit, but it is usually
a problem with the heater valve not closing off all the coolant flow.
Also a cheap and easy replacement.  Ken at http://vanagain.com has them
and instructions.
--
Stuart MacMillan

'84 Westy
'65 MGB
'73 MGB GT