I could have been wrong about the socket size of the TypeII/Vanagon axle nut. From my days selling foreign auto parts, I recall it as being 42mm, but 46mm is certainly possible. My ETKA 5 CD shows this axle nut as an M30x1 size, which is for the threads, not the external dimensions. Dan Jeanne Maly wrote: > Isn't it a 46 mm axle tool? Jeanne > > ----- Original Message ----- > From: Daniel Schmitz > To: vanagon@GERRY.VANAGON.COM > Sent: Thursday, July 20, 2000 3:04 PM > Subject: Re: Huge Nut on Rear Drum > 42mm, I think. Type 1 VW's (bugs) used a 36mm nut, Type IIs > and Vanagons use a 42mm version of same. > > Actually, you may not be able to get it off with just a > socket and ratchet. It's supposed to be on with a couple > hundred ft/lbs of torque. Unless you have a large breaker > bar and can exert sufficient leverage, you may need to get > the special tool that is designed to loosen these. This is a > special flattened, 1/2" drive steel socket having an > extension with two flat sides on it designed for hammering > on. You place it over the axle nut, place a ratchet or > breaker bar in the 1/2" drive, and while pressing down on > the ratchet you simultaneously hammer on the flat side to > break the nut free. I believe these are simply called axle > nut removers, and any VW parts place or large FLAPS should > carry them. All Type IIs and Vanagons use an axle nut to > retain the hub, so you should be able to find one. > > Not sure, though, why the hub has to be loosed to get the > drum off. Even if you have grooves worn in your drum, > backing off the brake shoes, using a rust dissolver and > tapping the drum with a mallet should loosen it. > > Dan > > Gary Stearns wrote: > > > I will very soon need to replace rear brake on our '88 > > GL. A few days ago I checked the Bentley, took a rear > > wheel off to consider how big a job this was going to be. > > Bentley says the rear hub castellated nut has to come off > > to get the drum off. Seems unecessary, but also seems no > > way to get a drum puller around the edges of the drum. > > OK, what size socket do I need. Geeeez, this thing > > measures 45mm! (clatter of sockets being pushed around in > > the toolbox) I don't see one of those in here! My largest > > socket is 24mm. Went to 2 FLAPS (Hey Tony! You ever see a > > 45mm socket?) and a Sears. FLAPS can order it for me from > > a specialty tool company for $55. No, I'll check with The > > List first. Do I need this blammit thing? Can one be > > had cheaper? Thanks - Gary > > -- > Dan > __________________________________________________ > Dan Schmitz - Genentech Automation Engineering > djs@gene.com (650) 225-6119 > __________________________________________________ > > "I'll so offend to make offense a skill > Redeeming time when men least think I will" > > W. Shakespeare > Henry IV, Part 1 > > -- Dan __________________________________________________ Dan Schmitz - Genentech Automation Engineering djs@gene.com (650) 225-6119 __________________________________________________ "I'll so offend to make offense a skill Redeeming time when men least think I will" W. Shakespeare Henry IV, Part 1
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.