Alan, If all was OK before the flush, then it might be the concentration or the type of coolant used that is the problem. The led can flash if it detects incorrect electrical current flow due to incorrect mixture (have read this from a previous post). I just flushed mine, using blue German Pentosion coolant. I did the standard Vanagon procedure. It had no problems afterward. I also added Redline Water Wetter. I took a 160 mile trip with no problems. I think it might be the "type" or "mixture" of the orange coolant that is giving you problems. Did you premix the coolant before adding?
Robert |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.