Date:         Tue, 18 Jul 2000 09:09:11 -0400
Reply-To:     Frank Miller <fmiller01@sprynet.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Miller <fmiller01@sprynet.com>
Subject:      Re: Brake line leaking (metal part)
Content-Type: text/plain; charset="us-ascii"

Herr Kapitan,
Replacing only a section of rusty brake line falls into the same area of
false economy as replacing just a section of exhaust pipe. If one piece
fails, the rest of the system is probably not too far behind. It's a major
PITA, but I would highly recommend that you bite the bullet & replace all
the metal lines while you are under there. Outside of being a dirty, nasty
job with crud falling in your face all the time, there's no real talent
required, just some patience.

At 10:56 PM 7/17/00 EDT, Kapitan Ray Nemo wrote:
>Sorry to repost, but I didn't get much response on this.  Has anyone replace
>the metal part of the brake lines?  Any tips on the job?
>
>____________________________________________________________________
>Get your own FREE, personal Netscape WebMail account today at
http://webmail.netscape.com.
>