For longest life use something with out ammonia.. it is not good for vinyl Bob Adams Sign shop owner
----- Original Message ----- From: "Terry Kay" <CTONLINE@webtv.net> To: <vanagon@GERRY.VANAGON.COM> Sent: Thursday, July 27, 2000 12:10 PM Subject: Suggested amendment to sticker installation instructions
> To all sticker receiving Vanagonites; > Let me make this suggestion to ease the installation. > After you clean your window good, with Windex, spray a fine mist on the > glass where the sticker is going to go, then lay the sticker, with the > backing paper, on the glass. > The fine mist will allow you to slide the sticker around a little, in > the event you have placed it on the glass crooked. > After you are satisfied with it position, take a plastic squeegee, ( > Bondo applicator will work ) and work out the air bubbles, starting from > the inside and work them to the outside edge of the sticker. > Let it sit for about 5 minutes and pull the paper backing off. > Your done, and the sticker is straight, and your happy! > > Good Luck, > > Terry |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.