Date:         Sun, 23 Jul 2000 23:53:14 -0400
Reply-To:     "Karl M." <thewestyman@mindspring.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Karl M." <thewestyman@mindspring.com>
Subject:      Re: FW: Potential purchase of Canadian Westy: Advice needed.
Comments: cc: tking_ms@msn.com
Content-Type: text/plain; charset="iso-8859-1"

>  - Get it checked out by a mechanic. Does anyone have recommendation for a
> qualified vanagon mechanic in Vancouver BC?

Any chance you might drive it over to Seattle to have it checked out there
before purchasing?

>  - Figure out the importing logistics for Washington state. I know I need
to
> get a certificate of compliance from VW and have the Speedo changed to
mph.
> Does anyone have any tips? Personal experience? Can I swap the speedo
myself
> before I bring it over, or must this be done by a dealer.

From my own experience, I had to ask VWOA for a certificate of
NON-compliance to get results, they feigned deafness/dumbness when I asked
for a certificate of compliance. Thing is, it states right in the door jamb
that it complies. Go figure. You can change the speedo yourself, but the DOT
will want an authorized VW dealer to verify it is done. Make sure to swap in
a Syncro speedo, of course. You will also be asked to swap the brake warning
indicator for the US one that has the word 'brake' printed on it.

> - General Mech. Questions: Some green corrosion at top of left head along
> gasket. No obvious leaks, but this can't be good at 55k miles, right?

Looks like a possible head gasket leak beginning, or maybe the pipe above
the left cylinder head.

Seems
> to run a little hot -- right on top of to a little above temp LED. Owner
> says its always run there.

Sounds normal.

Good luck!

Karl M