Date:         Thu, 27 Jul 2000 14:10:11 -0500
Reply-To:     CTONLINE@webtv.net
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Terry Kay <CTONLINE@webtv.net>
Subject:      Suggested amendment to sticker installation instructions
Content-Type: Text/Plain; Charset=US-ASCII

To all sticker receiving Vanagonites;
Let me make this suggestion to ease the installation.
After you clean your window good, with Windex, spray a fine mist on the
glass where the sticker is going to go, then lay the sticker, with the
backing paper, on the glass.
The fine mist will allow you to slide the sticker around a little, in
the event you have placed it on the glass crooked.
After you are satisfied with it position, take a plastic squeegee, (
Bondo applicator will work ) and work out the air bubbles, starting from
the inside and work them to the outside edge of the sticker.
Let it sit for about 5 minutes and pull the paper backing off.
Your done, and the sticker is straight, and your happy!

Good Luck,

Terry