In a message dated 8/5/00 6:54:10 AM Eastern Daylight Time, jfritz@willinet.net writes: << Chris, When adding these rails, do you: have to cut into that wood/linoleum flooring to get the rails flush with the floor or do they mount on top? and do the rails bolt on or need to be welded? >>
rails bolt into factory holes pre-drilled in westy floor (u can see the welded on nuts under your van), but if you want rails flush you need to sink them flush into wood floor. or you can mount on top, for easy removal, ive seen both ways chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.