Thanks, Ken. In looking at the photo of the clamps on your site, i see they are not the kind I was concerned about. They will clamp down without distorting the hose since they are not the kind that just pull one side. I'll be calling to place an order. steve KENWILFY@aol.com wrote: > The only reason to go with the crip on clamps versus the worm style clamps > would be that you wouldn't have to worry about the worm drive eating into the > hose. The clamps I sell are not worm drive, but are a band style clamp (like > the crimp clamps) that is merely tightened with a stainless screw (no cutting > into lines). The edges of the clamps are rolled to prevent biting into the > lines. The clamps I sell are ABA swedish stainless clamps that are top > quality. The crimp clamps are plain steel and will rust again in the future. > So why go to the trouble to buy a special tool to install a clamp that, if > you decide to remove a hose in the future for some reason, you will have to > cut off of the line? A clamp which will rust and eventually fail, when you > can buy my hose kit, which comes with the stainless clamps which are > tightened by either a slotted screw driver or a small socket for only $53? > The kit comes with the hose needed to do the engine compartment, 20 stainless > clamps, and a instruction sheet on how to do it. Hope this helps you make > your decision. > > Thanks, > Ken Wilford > http://www.vanagain.com > John 3:16 > > New Phone (856)-327-4936 > Shop: (856)-765-1583 > Fax: (856)-327-2242 |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.