A few weeks ago, I mentioned that the seals I purchased for my 89 poptop were not acceptable - allowed to much gap and the design was too far off of the OEM. Those came from RMMW. Not enough to condemn them, but I would stay away from the seals. Mike 89 Westy In a message dated 8/6/00 5:28:29, LISTSERV@GERRY.VANAGON.COM writes: << ------------------- Date: Sun, 6 Aug 2000 00:12:00 -0700 From: Karl Wolz <wolzphoto@worldnet.att.net> Subject: Re: MotorWorks and the Vanagon Yes, and yes. I'm almost certain that they are tied in with Bus Depot in some way. Possible a cooperative warehousing and shipping effort? I could be pretty far off base on that, though. Karl Wolz ----- Original Message ----- From: "Daniel Danrich" <danrich@ccmaui.net> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, August 05, 2000 11:55 PM Subject: MotorWorks and the Vanagon
> Rocky Mountain MotorWorks: has anyone bought parts from them before, good > experience? > www.motorworks.com > Dan > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.