Date:         Wed, 2 Aug 2000 19:33:23 -0400
Reply-To:     Bulley <gmbulley@bulley-hewlett.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bulley <gmbulley@bulley-hewlett.com>
Subject:      Re: Knocking engine?  or hyd lifters? how to tell?
Comments: To: "pokeswagon@blazenet.net" <pokeswagon@blazenet.net>

Lifters. Proceed with adjustment of valves, AFT/MMO treatment, or both.

G. Matthew Bulley, Principal Consultant
Bulley-Hewlett Corporate Communications
Mount Olive, NC USA
877.658.1278 Tollfree
www.bulley-hewlett.com

My Agenda: Vanquish Suburban Sprawl.
My Methods: Revitalize mature urban towns. Champion mass transit and fast
Internet service. Demand replacement of archaic, "separationist" zoning
laws with neo-traditional mixed-use zoning.
The Result: Exceptional living/working alternatives; restrained sprawl; our
children inherit walkable, beautiful, interlinked towns. Find out more at
http://www.cnu.org


-----Original Message-----
From:   (Donna Cassano) [SMTP:pokeswagon@blazenet.net]
Sent:   Wednesday, August 02, 2000 6:20 PM
To:     vanagon@GERRY.VANAGON.COM
Subject:        Re: Knocking engine?  or hyd lifters? how to tell?

Bulley wrote:
Lifters, however don't usually make a knocking sound...more like a TACK,

> TACK, TACK, TACK, TACK TACK, TACK, TACK, TACK. A knocking sound THACK-A,
> THACK-A, THACK-A, THACK-A is upper end bearings. A deep, THOCK, THOCK,
> THOCK, THOCK is lower end. A main bearing can be quiet, or can sound like
> all hell breaking loose, depending on severity and location of the
bearing.
>

I think mine is more of a TICK-A, TICK-A, TICK-A, sound