Mike, I just went out and measured my arms. The one I have in the rear position is roughly 20" bend to end along the horizontal section. I can't find the other arm. It must be in my garage somewhere but who knows where. I rarely use mine. Patrick
----- Original Message ----- From: mike miller <mwmiller@cwnet.com> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, August 13, 2000 10:13 AM Subject: Re: Bargains !
> Thank you. But... > > I have one so how do I tell which is which? > > Mike > ----- Original Message ----- > From: <JordanVw@aol.com> > To: <mwmiller@cwnet.com>; <vanagon@gerry.vanagon.com> > Sent: Sunday, August 13, 2000 8:41 AM > Subject: Re: Bargains ! > > > > In a message dated 8/13/00 11:20:05 AM Eastern Daylight Time, > > mwmiller@cwnet.com writes: > > > > << Does anyone know how to tell the difference between the front and rear > > tables/arms? > > >> > > > > theyre different lengths..the top part. > > chris > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.