Screwed again by Nogood Auto Parts Assholes DM&FS -----Original Message----- From: Robert Lilley <Wolfvan88@aol.com> To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM> Date: Saturday, August 12, 2000 10:45 PM Subject: Re: OIL LIGHT wire protection...A better way 1200 degrees of protection W/no BURN
><< $30+ on the roll of 12', >> > >You can get a 25' is 7.95/various colors 9.95 or 50' is 14.95/various colors >17.95 roll of Fiberglass insulation sleeves form JC Whitney. > >They Withstand 1200 degrees. I have put them on many of the exposed wires >and also over the spark plug wires. I have also put them over some of the >fuel lines. I plan to go to stainless steel fuel lines for fire safety. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.