Keith, I don't know where you can buy in the US. In Canada, you can buy Rust Check spray cans from Canadian Tire. Both Krown and Rust Check have franchised shops. These places do your entire vehicle for $C100 to $C150 depending upon vehicle size. To get at the interior panels, they drill holes in the door frame area and pass their spray wands into the interior. The holes are then plugged with plastic stoppers. The holes are the part that I don't like. When I had our '91 MR2 Turbo done, I forbid any hole drilling and instructed the shop owner how to get at everything without them. However, I had the holes drilled in our '86 Syncro Westfalia. I did the '86 Syncro Doublecab myself with spray cans. The spray can route is cheaper but not as thorough in my opinion. Next year I'll probably have them do the truck too (holes and all). -Larry
Keith Olsen wrote: > Does anyone in the states carry it? > or more importantly....can Ron or Ken get it to sell to us rust prone > Northeasterners? > Keith |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.