Date:         Wed, 9 Aug 2000 22:43:02 -0500
Reply-To:     Aaron <spokes@attglobal.net>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Aaron <spokes@attglobal.net>
Subject:      help identify bushings
Content-Type: text/plain; charset="iso-8859-1"

howdy

i have an 83.5 westy. i would like to replace a few bushings, but cannot
identify them or otherwise determine a part number.  In the Bentley manual
(40.2) they are labeled "bushing" - they go on either side of the
"stabilizer link" where it pierces the "strut bar", and they are held in
place by collared washers. In the Haynes manual (9.8, picture 7.2) the
picture has an arrow pointing directly at the upper bushing of one of these
pairs.

TIA, aaron
eau claire, wi
83.5 westy "westy"

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.