Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2000, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 8 Aug 2000 09:38:13 -0400
Reply-To:     David Beierl <dbeierl@attglobal.net>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@attglobal.net>
Subject:      Re: Need TDI conversion info
Comments: To: Helmut.Zeidler@nokia.com
In-Reply-To:  <A914533BF4B9D2118D980008C7894C0A0345E7AF@dueis01nok>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 02:50 8/8/2000, Helmut Zeidler wrote: >David, > >Thanks for your introduction to marine engines. > From my experience with VW SDI and TDI engines >I like to give you some more details to answer >your statements.

Thanks, Helmut, I'll check it out. I must say that marine service is like industrial or powerplant service -- extremely severe duty. It will be surprising to me if VW rate these engines the same as automotive engines, and if they do I will be very doubtful of the engine's endurance and would be cautious about buying one for marine use. Concerning the weight, I overstated my meaning -- as you say, the specific additional components are not very heavy; but if the engine is derated -- for example, I am acquainted with a particular boat having a 300hp Caterpillar Diesel which is derated to 200hp for marine use -- 33% less power but the same weight. I don't know the weight but would estimate it at easily 300 kg with reduction gear. I believe it is a 2-cycle engine with Roots blower. It is an inline 6, unknown displacement, redline somewhere around 2500 rpm I believe. Normal use around 1500 rpm in this boat, swinging a four-bladed propeller of about 110mm diameter and 130mm pitch with 2.5:1 reduction. The boat, incidentally, is about 18 meters long and 39,000kg displacement, cruises around 9 knots. A faster boat would not need the great reduction and very large propeller. I would expect 3000-4000 hours from this engine before overhaul (but I'm guessing on that).

A racing engine will of course be entirely different, everything is sacrificed to power.

david David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation"


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.