Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2000, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 14 Aug 2000 13:26:56 -0400
Reply-To:     "Joe L." <mejoe100@earthlink.net>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Joe L." <mejoe100@earthlink.net>
Subject:      Re: O2 Sensors need grounding? (was STILL BUCKING & KICKING!!!)
Comments: To: David Beierl <dbeierl@attglobal.net>
In-Reply-To:  <4.3.2.7.2.20000814105026.00dde2f0@#pop1.attglobal.net@127.0.0.1>
Content-Type: text/plain; charset="iso-8859-1"

Come to think about it, when I "accidently" cured my B&K troubles during the muffler replacement I removed my O2 sensor just to make sure it had not "welded" itself in place. I didnt replace the sensor; just removed it, cleaned the threads, smeared a thin coat of anti-seize and put it back in. It was quite a job loosening the sensor so it might be that it was not grounded before removal but was grounded after.

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of David Beierl Sent: Monday, August 14, 2000 10:55 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: O2 Sensors need grounding? (was STILL BUCKING & KICKING!!!)

At 12:38 8/13/2000, Gary Stearns wrote: >Do oxygen sensors require grounding through the exhaust system?

Yes

> Could this >be why exhaust work would mysteriously cure b&k?

Yes, ie yes could be, not yes is.

> Could the anti-seize goop >I put on the threads (only on the threads, not on the sensor) be isolating >my sensor? Just curious.

It's quite possible that the antiseize poisoned your sensor and ruined it. I did it to one of Jon Casey's a month ago by being thoughtless -- the sensors come with a dab of "safe" antiseize already applied to the threads. This was a reinstall and I don't know what/where to get stuff that's safe -- it may even be that they simply are very careful where it's applied, though I doubt it. Anyway, Jon's lasted about five or maybe ten minutes before it was toast.

I doubt that it would interfere with the connection though, if the sensor were tightened reasonably.

david David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation"


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.