Date:         Sun, 13 Aug 2000 11:11:19 -0700
Reply-To:     mike miller <mwmiller@cwnet.com>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mike miller <mwmiller@cwnet.com>
Subject:      Re: Bargains !
Comments: To: Patrick Bryson <patrickb@extremezone.com>
Content-Type: text/plain; charset="iso-8859-1"

Thanks much for the information.  You, and the other folks that responded.
List is a great help.

Now I can see if I can spend yet more money on parts that I really don't
need for my van that never breaks, no matter that I drive it at 200 kph at
all times, even in my driveway and get 29 mpg while doing so.  [Go away and
leave me in my dream world, ignorant and happy.]

Mike


----- Original Message -----
From: "Patrick Bryson" <patrickb@extremezone.com>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, August 13, 2000 10:46 AM
Subject: Re: Bargains !


> Mike,
> I just went out and measured my arms.  The one I have in the rear position
> is roughly 20" bend to end along the horizontal section.  I can't find the
> other arm.  It must be in my garage somewhere but who knows where.  I
rarely
> use mine.
>
> Patrick
>
>
>
>
> ----- Original Message -----
> From: mike miller <mwmiller@cwnet.com>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Sunday, August 13, 2000 10:13 AM
> Subject: Re: Bargains !
>
>
> > Thank you.  But...
> >
> > I have one so how do I tell which is which?
> >
> > Mike
> > ----- Original Message -----
> > From: <JordanVw@aol.com>
> > To: <mwmiller@cwnet.com>; <vanagon@gerry.vanagon.com>
> > Sent: Sunday, August 13, 2000 8:41 AM
> > Subject: Re: Bargains !
> >
> >
> > > In a message dated 8/13/00 11:20:05 AM Eastern Daylight Time,
> > > mwmiller@cwnet.com writes:
> > >
> > > << Does anyone know how to tell the difference between the front and
> rear
> > >  tables/arms?
> > >   >>
> > >
> > > theyre different lengths..the top part.
> > > chris
> > >
> >
>