Rick, I was able to lower the HC by turning the screw on the throttle body out (counter clockwise). This is the screw that VW says adjusts the idle speed, NOT the one under the plug. Walt Spak Pittsburgh, PA. wnsopc3@3rdm.net ----- Original Message ----- From: Rick Berman <love2bike@uswest.net> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, August 15, 2000 11:42 PM Subject: HELP HC to High at idle 525ppm should be about 70ppm
> We cannot get the HC down at idle it is now is about 500+. > We have tried all the usually stuff. We have a allen 4 gas > and a allen engine tester. Does anyone have some > suggestions. > > Rick |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.