Date:         Sat, 19 Aug 2000 13:24:35 -0700
Reply-To:     "Steven X. Schwenk" <sxs@concentric.net>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Steven X. Schwenk" <sxs@concentric.net>
Subject:      Re: [Syncro] CV Boots and crimp clamps
Comments: To: Dave Bayer <daveb@cp.net>
Comments: cc: syncro@egroups.com
Content-Type: text/plain; charset=us-ascii

I used zip ties on the fronts.  The outter one is holding fine.  The inner one seems to be
slipping off.  I have not yet found out why, but will by the end of the day.
steve

Dave Bayer wrote:

> Hi-
>         So I ordered and recieved a set of 4 CV Boot Kits to replace
> the boots on the rear axles. The kits I recieved were Meistersatz kits
> and they appear to ship without crimp clamps to secure the rubber end
> on the axle. The boot however has little lines on the rubber end around
> the circumference suggesting that it is meant to be fastened with a
> crimp clamp. Does anyone know if the crimp clamps are necessary?
>
> dave
>
> --------------------------------------------------------------------<e|-
> Special Offer-Earn 300 Points from MyPoints.com for trying @Backup
> Get automatic protection and access to your important computer files.
> Install today:
> http://click.egroups.com/1/6347/4/_/527143/_/966716078/
> --------------------------------------------------------------------|e>-
>
> If you would like to modify your subscription settings (including unsubscribing), visit:
> http://www.egroups.com/subscribe/Syncro