Robert, if the engine is making more power at lower rpm's, than there is more load on the motor. An extreme case of low rpm power would be lugging, the worse thing you can do to a motor.
> Mark, > It should not increase bearing wear any more than normal but can > help because > the engine can make the power easier at lower RPMs, and you > extra power > to simply get you to your normal driving a little sooner, then > the chip will > help the engine last longer. > > > Adding the counterweights at rebuild time, makes the engine last > longer and > run smoother and increases the bearing life beyond the 150,000 to 300,000. > > > Robert > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.