Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2000, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 1 Sep 2000 10:43:08 +1100
Reply-To:     David Del Ben <ddelben@AIRINTER.COM.AU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Del Ben <ddelben@AIRINTER.COM.AU>
Organization: Air International Transit
Subject:      Re: D.I.Y. R-134 Kit AC Recharge advice
Content-Type: text/plain; charset="us-ascii"

Ditto to some good advice below from Charlie. Being an Air Conditioning Engineer myself - can testify to the comments below. Don't even attempt to work on the A/C unless you know what you're doing.

Slight comment: R12 & R134a are equivalent pressures for all intensive purposes. R134a was designed that way. R134a is slightly higher at high temps, but is slighghtly lower at low temps. Don't see any reason why the Vanagons cannot be successfully converted to R134a from R12 when done correctly.

David Del Ben Air International Transit Ph (02) 9830 7119 Fax (02) 9672 1018

-----Original Message----- From: Charles Hokanson [SMTP:Candmhok@AOL.COM] Sent: Friday, September 01, 2000 10:16 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: D.I.Y. R-134 Kit AC Recharge advice

Yes there is a lot more to know. First, if you have a vanagon, you do not have R134 unless it has already been converted. you have R12 and they cannot be mixed (either physically or legally, and niether can their oils). If you are thinkng of using one of those walmart Interdynamics conversion kits, my advice would be don't. the process is much more involved than it seems from the kit. If you are going to do a 134a conversion right you need to evacuate the system, flush it, change the seals, change the receiver/dryer, add PAG oil, vaccum, then charge (and I may have missed some stuff as I writing quickly -- Like there is a rule on high pressure cut off switches, but I dunno if it is applicable to vanagons). If you need more feedback on those kits go to aircondition.com in the questions board and look at all the posts from people who bought the kit, got cold air for a short time, then destroyed their A/C system THEN posted questions about how to do it. That site is also a great place to learn and get ques! tions answered. GO TO THAT SITE BEFORE DOING ANYTHING!!!! BTW: if you are trying to convert just so you can get the refrigerant and so to do the job yourself, I recommend you go to epatest.com and spend 18.00, take a test and get certified so you can buy R12 (or Freeze 12 which I think ken at vanagain likes and is a lot cheapre than R12.) Off the cuff, and without trying it, I do not believe our vehicles are good candidates for 134 conversions anyway -- r12 and r134 systems ARE different in many ways not the least of which is the higher pressures of 134 (and smaller molecules leading to leaks) and the need for a larger (preferably crossflow) condensor. That's my opinion. Charlie.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.